Easy To Install

Where are They Installed

Hit The Target – Pee Targets are stuck into of the toilet bowl or potty or onto the urinal back wall. They are suitable for all types of toilet bowls, potties and urinals including ceramic, stainless steel, plastic, fibre glass, enamel and steel. They are ideal for all waterless urinals and all wall hung urinals.

Hit The Target – Pee Targets are stuck in the toilet bowl just above the water level to allow for falling trajectory. For urinals they are stuck on the back wall of the urinal at suitable height subject to the type & size of the urinal.

For long stainless steel urinals we recommend that 2 or 3 Hit The Target – Pee Targets be installed with 1.0m – 1.2m spacing about 25% up the height of the urinal.

Easy Installation

Urinals

Clean area where the Pee Target is to be installed. Do final wash with clean water. Dry the area with paper towel. If urinal is weeping either turn off the isolation valve or divert water flow around the target area by temporarily blocking water outlet with paper towels, putty or Blue Tack. Turn valve back on when install is finished.

Peel backing off the Pee Target. Apply sticker to urinal. Centre first & smooth out from centre eliminating any air bubbles. Leave for 30 minutes to allow the adhesive to cure before using the urinal.

Toilet bowls

Clean area where the Pee Target is to be installed. Do final wash with clean water. Dry the area with paper towel. If cistern is weeping turn off the cistern isolation valve or stop the water flow around the target area by temporarily blocking water outlet with paper towels.

Peel backing off the Pee Target. Apply to toilet bowl about 1 cm above the water level. Centre first & smooth out from centre eliminating any air bubbles. Leave for 30 minutes to allow the adhesive to cure before using the urinal. Turn isolation valve back on.

Potty

Subject to the potty design, Pee Targets can generally be stuck in the bottom of the potty toward the rear or on the curve between back wall and bottom of the potty. Clean area where the Pee Target is to be installed. Dry the area with paper towel. Peel the backing off the Pee Target sticker apply sticker to urinal. Centre first generally easiest and smooth out from centre eliminating any air bubbles. If possible leave for 30 minutes to allow adhesive to cure before using the urinal.

What are They Made Of?

Hit The Target – Pee Targets are made from waterproof polyester film with a super strong water proof adhesive backing. They are resistant to urine, uric acid and most commercial chemical cleaners. Normal flushing and cleaning keeps them fresh and clean.

Need further information?

If you need further information on Hit The Target – Pee Targets or how to install them and cannot immediately find the answer in FAQ page

Call us on Tel: 1300 NoFlush or Tel: 08 9386 2366
Email us: via Contact Page or E: info@peetarget.com.au

Hit The Target – Pee Target Order Form (PDF)

For Clients who cannot purchase online and require a hard copy order or need to issue a Purchase Order Number and receive an invoice, we have attached Hit the Target – Pee Target Order Form that can be down loaded and returned to us via email or fax.
Email: sales@peetarget.com.au or Fax: 08 9386 2300.

Telephone Orders

We are always happy to take telephone orders on Tel: 1300 NoFlush or Tel: 08 9386 2366